httpd 2.4.6 + mysql-5.5.28 + php-5.4.19编译安装过程:
一、编译安装apache
1、解决依赖关系
httpd-2.4.4需要较新版本的apr和apr-util,因此需要事先对其进行升级。升级方式有两种,一种是通过源代码编译安装,一种是直接升级rpm包。
(1) 编译安装apr
# tar xf apr-1.4.6.tar.bz2
# cd apr-1.4.6
# ./configure –prefix=/usr/local/apr
# make && make install
(2) 编译安装apr-util
# tar xf apr-util-1.4.1.tar.bz2
# cd apr-util-1.4.1
# ./configure –prefix=/usr/local/apr-util –with-apr=/usr/local/apr
# make && make install
(3) httpd-2.4.6编译过程也要依赖于pcre-devel软件包,需要事先安装。此软件包系统光盘自带,因此,找到并安装即可。
2、编译安装httpd-2.4.6
# tar xf httpd-2.4.4.tar.bz2 -C /usr/local
# cd /usr/local/httpd-2.4.4
# ./configure –prefix=/usr/local/apache –sysconfdir=/etc/httpd –enable-so –enable-ssl –enable-cgi –enable-rewrite –with-zlib –with-pcre –with-apr=/usr/local/apr –with-apr-util=/usr/local/apr-util –enable-modules=most –enable-mpms-shared=most(将most更改为all,否则会出错) –with-mpm=event
# make && make install
补充:
(1)构建MPM为静态模块
在全部平台中,MPM都可以构建为静态模块。在构建时选择一种MPM,链接到服务器中。如果要改变MPM,必须重新构建。为了使用指定的MPM,请在执行configure脚本 时,使用参数 –with-mpm=NAME。NAME是指定的MPM名称。编译完成后,可以使用 ./ httpd -l 来确定选择的MPM。 此命令会列出编译到服务器程序中的所有模块,包括 MPM。
(2)构建 MPM 为动态模块
在Unix或类似平台中,MPM可以构建为动态模块,与其它动态模块一样在运行时加载。 构建 MPM 为动态模块允许通过修改LoadModule指令内容来改变MPM,而不用重新构建服务器程序。在执行configure脚本时,使用–enable-mpms-shared选项即可启用此特性。当给出的参数为all时,所有此平台支持的MPM模块都会被安装。还可以在参数中给出模块列表。默认MPM,可以自动选择或者在执行configure脚本时通过–with-mpm选项来指定,然后出现在生成的服务器配置文件中。编辑LoadModule指令内容可以选择不同的MPM。
3、修改httpd的主配置文件,设置其Pid文件的路径
编辑/etc/httpd/httpd.conf,添加如下行即可:
PidFile “/ var /run/httpd.pid”
4、提供SysV服务脚本/etc/rc.d/init.d/httpd,内容如下:
#!/ bin /bash
#
# httpd Startup script for the Apache HTTP Server
#
# chkconfig: – 85 15
# description: Apache is a World Wide Web server. It is used to serve \
# HTML files and CGI.
# processname: httpd
# config: /etc/httpd/conf/httpd.conf
# config: /etc/sysconfig/httpd
# pidfile: /var/run/httpd.pid
# Source function library.
. /etc/rc.d/init.d/functions
if [ -f /etc/sysconfig/httpd ]; then
. /etc/sysconfig/httpd
fi
# Start httpd in the C locale by default.
HTTPD_LANG=${HTTPD_LANG-“C”}
# This will prevent initlog from swallowing up a pass-phrase prompt if
# mod_ssl needs a pass-phrase from the user.
ini TLOG_ARGS=””
# Set HTTPD=/usr/sbin/httpd.worker in /etc/sysconfig/httpd to use a server
# with the thread-based “worker” MPM; BE WARNED that some modules may not
# work correctly with a thread-based MPM; notably PHP will refuse to start.
# Path to the apachectl script, server binary, and short-form for messages.
apachectl=/usr/local/apache/bin/apachectl
httpd=${HTTPD-/usr/local/apache/bin/httpd}
prog=httpd
pidfile=${PIDFILE-/var/run/httpd.pid}
lockfile=${LOCKFILE-/var/lock/subsys/httpd}
RETVAL=0
start() {
echo -n $”Starting $prog: ”
LANG=$HTTPD_LANG daemon –pidfile=${pidfile} $httpd $OPTIONS
RETVAL=$?
echo
[ $RETVAL = 0 ] && touch ${lockfile}
return $RETVAL
}
stop() {
echo -n $”Stopping $prog: ”
killproc -p ${pidfile} -d 10 $httpd
RETVAL=$?
echo
[ $RETVAL = 0 ] && rm -f ${lockfile} ${pidfile}
}
reload() {
echo -n $”Reloading $prog: ”
if ! LANG=$HTTPD_LANG $httpd $OPTIONS -t >&/dev/null; then
RETVAL=$?
echo $”not reloading due to configuration syntax error”
failure $”not reloading $httpd due to configuration syntax error”
else
killproc -p ${pidfile} $httpd -HUP
RETVAL=$?
fi
echo
}
# See how we were called.
case “$1” in
start)
start
;;
stop)
stop
;;
status)
status -p ${pidfile} $httpd
RETVAL=$?
;;
restart)
stop
start
;;
condrestart)
if [ -f ${pidfile} ] ; then
stop
start
fi
;;
reload)
reload
;;
graceful|help|configtest|fullstatus)
$apachectl $@
RETVAL=$?
;;
*)
echo $”Usage: $prog {start|stop|restart|condrestart|reload|status|fullstatus|graceful|help|configtest}”
exit 1
esac
exit $RETVAL
而后为此脚本赋予执行权限:
# chmod +x /etc/rc.d/init.d/httpd
加入服务列表:
# chkconfig –add httpd
接下来就可以启动服务进行测试了。
二:编译安装php-5.4.13
1、解决依赖关系:
请配置好yum源(可以是本地系统光盘)后执行如下命令:
# yum -y groupinstall “X Software Development”
yum groupinstall “Server Platform Development” “Developmenttools” “Desktop Platform Development”
安装数据加密等扩展工具:libmcrypt、mhash、mcrypt
2、编译安装php-5.4.13
# tar xf php-5.4.19.tar.bz2
# cd php-5.4.19
# ./configure –prefix=/usr/local/php –with-mysql=mysqlnd –with-pdo-mysql=mysqlnd –with-mysqli=mysqlnd –enable-mbstring –with-freetype-dir –with-jpeg-dir –with-png-dir –with-zlib –with-libxml-dir=/usr –enable-xml –enable-sockets –enable-fpm –with-mcrypt –with-config-file-path=/etc –with-config-file-scan-dir=/etc/php.d –with-bz2 –with-openssl –with-apxs2=/usr/local/apache/bin/apxs –enable-maintainer-zts
说明:
1、这里为了支持apache的worker或event这两个MPM,编译时使用了–enable-maintainer-zts选项。
2、如果使用PHP5.3以上版本,为了链接MySQL数据库,可以指定mysqlnd,这样在本机就不需要先安装MySQL或MySQL开发包了。mysqlnd从php 5.3开始可用,可以编译时绑定到它(而不用和具体的MySQL客户端库绑定形成依赖),但从PHP 5.4开始它就是默认设置了。
# ./configure –with-mysql=mysqlnd –with-pdo- mysql =mysqlnd –with-mysqli=mysqlnd
# make
# make test
# make intall
为php提供配置文件:
# cp php.ini-production /etc/php.ini
3、 编辑apache配置文件httpd.conf,以apache支持php
# vim /etc/httpd/httpd.conf
1、添加如下二行
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
2、定位至DirectoryIndex index.html
修改为:
DirectoryIndex index.php index.html
而后重新启动httpd,或让其重新载入配置文件即可测试php是否已经可以正常使用。
4、配置 php-fpm
1、为php-fpm提供脚本:
cp /usr/local/php-5.4.19/sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm
chmod +x /etc/init.d/php-fpm
2、提供php-fpm配置文件并编辑
cp /usr/local/ php-5.4.19/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf
vim /usr/local/php-5.4.19/etc/php-fpm.conf
pm.max_children = 150
pm.start_servers = 8
pm.min_spare_servers = 5
pm.max_spare_servers = 10
pid = /usr/local/php/var/run/php-fpm.pid
3、启动php-fpm服务
Service php-fpm start
三、安装xcache,为php加速: 1、安装 # tar xf xcache-3.0.1.tar.gz # cd xcache-3.0.1 phpize是用来扩展php扩展模块的,通过phpize可以建立php的 外挂模块 比如你想在原来编译好的php中加入memcached或者 ImageMagick等扩展模块,可以使用phpize # /usr/local/php/bin/phpize # ./configure --enable-xcache --with-php-config=/usr/local/php/bin/php-config [ ./configure --enable-xcache --prefix=/usr/local/xcache --with-php-config=/usr/local/php/bin/php-config ] # make && make install 安装结束时,会出现类似如下行: Installing shared extensions: /usr/local/php/lib/php/extensions/no-debug-zts-20100525/
2、编辑php.ini,整合php和xcache: 首先将xcache提供的样例配置导入php.ini # mkdir /etc/php.d # cp xcache.ini /etc/php.d
说明:xcache.ini文件在xcache的源码目录中。 接下来编辑/etc/php.d/xcache.ini(也有在/etc/php.ini文件中添加),找到zend_extension开头的行,修改为如下行: zend_extension = /usr/local/php/lib/php/extensions/no-debug-zts-20100525/xcache.so 注意:如果php.ini文件中有多条zend_extension指令行,要确保此新增的行排在第一位。
四、安装mysql-5.5.28 1、准备数据存放的文件系统 新建一个逻辑卷,并将其挂载至特定目录即可。这里不再给出过程。 这里假设其逻辑卷的挂载目录为/mydata,而后需要创建/mydata/data目录做为mysql数据的存放目录。 2、新建用户以安全方式运行进程: # groupadd -r mysql # useradd -g mysql -r -s /sbin/nologin -M -d /mydata/data mysql # chown -R mysql:mysql /mydata/data 3、安装并初始化mysql-5.5.28 # tar xf mysql-5.5.28-linux2.6-i686.tar.gz -C /usr/local # cd /usr/local/ # ln -sv mysql-5.5.28-linux2.6-i686 mysql # cd mysql # chown -R mysql:mysql . # ./scripts/mysql_install_db --user=mysql --datadir=/mydata/data # chown -R root . 4、为mysql提供主配置文件: # cd /usr/local/mysql # cp support-files/my-large.cnf /etc/my.cnf 并修改此文件中thread_concurrency的值为你的CPU个数乘以2,比如这里使用如下行: thread_concurrency = 2 另外还需要添加如下行指定mysql数据文件的存放位置: datadir = /mydata/data 5、为mysql提供sysv服务脚本: # cd /usr/local/mysql # cp support-files/mysql.server /etc/rc.d/init.d/mysqld # chmod +x /etc/rc.d/init.d/mysqld 添加至服务列表: # chkconfig --add mysqld # chkconfig mysqld on 而后就可以启动服务测试使用了。 为了使用mysql的安装符合系统使用规范,并将其开发组件导出给系统使用,这里还需要进行如下步骤: 6、输出mysql的man手册至man命令的查找路径: 编辑/etc/man.config,添加如下行即可: MANPATH /usr/local/mysql/man 7、输出mysql的头文件至系统头文件路径/usr/include: 这可以通过简单的创建链接实现: # ln -sv /usr/local/mysql/include /usr/include/mysql 8、输出mysql的库文件给系统库查找路径: # echo '/usr/local/mysql/lib' > /etc/ld.so.conf.d/mysql.conf 而后让系统重新载入系统库: # ldconfig 9、修改PATH环境变量,让系统可以直接使用mysql的相关命令。具体实现过程这里不再给出。
10、修改mysql管理员密码
11、授权mysql管理员远程登录mysql数据库
注:关闭mysql服务器的防火墙 五、启用服务器状态 mod_status模块可以让管理员查看服务器的执行状态,它通过一个HTML页面展示了当前服务器的统计数据。这些数据通常包括但不限于: (1) 处于工作状态的worker进程数; (2) 空闲状态的worker进程数; (3) 每个worker的状态,包括此worker已经响应的请求数,及由此worker发送的内容的字节数; (4) 当前服务器总共发送的字节数; (5) 服务器自上次启动或重启以来至当前的时长; (6) 平均每秒钟响应的请求数、平均每秒钟发送的字节数、平均每个请求所请求内容的字节数; 启用状态页面的方法很简单,只需要在主配置文件中添加如下内容即可: <Location /server-status> SetHandler server-status Require all granted </Location> 需要提醒的是,这里的状态信息不应该被所有人随意访问,因此,应该限制仅允许某些特定地址的客户端查看。比如使用Require ip 172.16.0.0/16来限制仅允许指定网段的主机查看此页面。 (可能出现的错误 httpd编译安装常见错误: checking for OpenSSL version >= 0.9.8a... FAILED configure: WARNING: OpenSSL version is too old no checking whether to enable mod_ssl... configure: error: mod_ssl has been requested but can not be built due to prerequisite failures 原因: 缺少openssl-devel包 yum install openssl-devel 安装完openssl-devel后编译安装httpd --with-ssl可以指明路径也可以不指 如果要指,可以通过下面命令查看 #openssl version -a OpenSSL 1.0.1e-fips 11 Feb 2013 built on: Mon Feb 20 14:38:48 UTC 2017 platform: linux-x86_64 options: bn(64,64) md2(int) rc4(16x,int) des(idx,cisc,16,int) idea(int) blowfish(idx) compiler: gcc -fPIC -DOPENSSL_PIC -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DKRB5_MIT -m64 -DL_ENDIAN -DTERMIO -Wall -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wa,--noexecstack -DPURIFY -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM OPENSSLDIR: "/etc/pki/tls" engines: dynamic --with-ssl=/etc/pki/tls )