您的位置 首页 php

JS 中的require 和 import 区别

在研究react和webpack的时候,经常看到在js文件中出现require,还有import,这两个都是为了JS模块化编程使用。CSS的是@import1.ES6 模块的设计思想,是尽量的静态化,使得编译时就能确定模块的依赖关系,以及输入和输出的变量。Require是CommonJS的语法,CommonJS的模块是对象,输入时必须查找对象属性。

// CommonJS模块let { stat, exists, readFile } = require('fs');// 等同于let _fs = require('fs');let stat = _fs.stat;let exists = _fs.exists;let readfile = _fs.readfile;

above:整体加载fs模块(即加载fs所有方法),生成一个对象”_fs”,然后再从这个对象上读取三个方法,这叫“运行时加载”,因为只有运行时才能得到这个对象,不能在编译时做到静态化。ES6模块不是对象,而是通过export命令显示指定输出代码,再通过import输入。

import { stat, exists, readFile } from 'fs';

above:从fs加载“stat, exists, readFile” 三个方法,其他方法不加载,2.ES6模块默认使用严格模式,无论是否声明“use strict”ES6 模块之中,顶层的this指向undefined,即不应该在顶层代码使用this。Module 主要由两个命令组成,import和export,export用于规定模块的对外接口,import命令用于输入其他模块提供的功能3.Export模块是独立的文件,该文件内部的所有的变量外部都无法获取。如果希望获取某个变量,必须通过export输出,

// profile.jsexport var firstName = 'Michael';export var lastName = 'Jackson';export var year = 1958;

或者用更好的方式:用大括号指定要输出的一组变量

// profile.jsvar firstName = 'Michael';var lastName = 'Jackson';var year = 1958;export {firstName, lastName, year};

除了输出变量,还可以输出函数或者类(class),

export function multiply(x, y) { return x * y;};

还可以批量输出,同样是要包含在大括号里,也可以用as重命名:

function v1() { ... }function v2() { ... }export { v1 as streamV1, v2 as streamV2, v2 as streamLatestVersion };

Attention:export 命令规定的是对外接口,必须与模块内部变量建立一一对应的关系

// 写法一export var m = 1;// 写法二var m = 1;export {m};// 写法三var n = 1;export {n as m};// 报错export 1;// 报错var m = 1;export m;

报错的写法原因是:没有提供对外的接口,第一种直接输出1,第二种虽然有变量m,但还是直接输出1,导致无法解构。同样的,function和class的输出,也必须遵守这样的写法。

// 报错function f() {}export f;// 正确export function f() {};// 正确function f() {}export {f};

And:export语句输出的接口,都是和其对应的值是动态绑定的关系,即通过该接口取到的都是模块内部实时的值。位置:export模块可以位于模块中的任何位置,但是必须是在模块顶层,如果在其他作用域内,会报错。

function foo() { export default 'bar' // SyntaxError}foo()

4.Import命令export定义了模块的对外接口后,其他JS文件就可以通过import来加载这个模块,

// main.jsimport {firstName, lastName, year} from './profile';function setName(element) { element.textContent = firstName + ' ' + lastName;}

import命令接受一对大括号,里面指定要从其他模块导入的变量名,必须与被导入模块(profile.js)对外接口的名称相同。如果想重新给导入的变量一个名字,可以用as关键字,

import { lastName as surname } from './profile';

import后的from 可以指定需要导入模块的路径名,可以是绝对路径,也可以是相对路径, .js路径可以省略,如果只有模块名,不带有路径,需要有配置文件指定。注意,import命令具有提升效果,会提升到整个模块的头部,首先执行。(是在编译阶段执行的)因为import是静态执行的,不能使用表达式和变量,即在运行时才能拿到结果的语法结构(e.g. if…else…)5.module的整体加载除了指定加载某个输出值,还可以用(*)指定一个对象,所有的变量都会加载在这个对象上。

// circle.js。输出两个函数export function area(radius) { return Math.PI * radius * radius;}export function circumference(radius) { return 2 * Math.PI * radius;}// main.js 加载在个模块import { area, circumference } from './circle';console. log (' 圆面积 :' + area(4));console.log(' 圆周长 :' + circumference(14));//上面写法是逐一指定要加载的方法,整体加载的写法如下。import * as circle from './circle';console.log('圆面积:' + circle.area(4));console.log('圆周长:' + circle.circumference(14));

注意,模块整体加载所在的那个对象(上例是circle),应该是可以静态分析的,所以不允许运行时改变。

import * as circle from './circle';// 下面两行都是不允许的circle.foo = 'hello';circle.area = function () {};

6.export default之前的例子中,使用import导入时,都需要知道模块中所要加载的变量名或函数名,用户可能不想阅读源码,只想直接使用接口,就可以用export default命令,为模块指定输出

// export-default.jsexport default function () { console.log('foo');}

其他模块加载该模块时,import命令可以为该匿名函数指定任意名字。

// import-default.jsimport customName from './export-default';customName(); // 'foo'

export default也可以用于非匿名函数前。下面比较一下默认输出和正常输出。

// 第一组export default function crc32() { // 输出 // ...}import crc32 from 'crc32'; // 输入// 第二组export function crc32() { // 输出 // ...};import {crc32} from 'crc32'; // 输入

可以看出,使用export default时,import语句不用使用大括号。*******import和export命令只能在模块的顶层,不能在代码块之中。否则会语法报错。这样的设计,可以提高编译器效率,但是没有办法实现运行时加载。因为require是运行时加载,所以import命令没有办法代替require的动态加载功能。所以引入了import()函数。完成动态加载。

import(specifier)

specifier用来指定所要加载的模块的位置。import能接受什么参数,import()可以接受同样的参数。import()返回一个Promise对象。

const main = document.querySelector('main');import(`./section-modules/${someVariable}.js`) .then(module => { module.loadPageInto(main); }) .catch(err => { main.textContent = err.message; });

7.import()函数适用场合1)按需加载:

 button.addEventListener('click', event => { import('./dialogBox.js') .then(dialogBox => { dialogBox.open(); }) .catch(error => { /* Error handling */ })});

above: import模块在事件监听函数中,只有用户点击了按钮,才会加载这个模块。2)条件加载:import()可以放在if…else语句中,实现条件加载。

if (condition) { import('moduleA').then(...);} else { import('moduleB').then(...);}

文章来源:智云一二三科技

文章标题:JS 中的require 和 import 区别

文章地址:https://www.zhihuclub.com/40051.shtml

关于作者: 智云科技

热门文章

网站地图