下载php7.4
cd /data
mkdir programs
cd programs
# 下载php源文件
wget
解压文件
tar -zxvf php-7.4.21.tar.gz
cd php-7.4.7
预下载依赖
yum -y install libxml2-devel openssl-devel sqlite-devel libcurl-devel libicu-devel gcc-c++ oniguruma oniguruma-devel libxslt-devel libpng-devel libjpeg-devel freetype-devel
可能出现的错误
No package ‘libxml-2.0’ found
configure: error: Package requirements (libxml-2.0 >= 2.7.6) were not met:
No package 'libxml-2.0' found
解决方法
yum install libxml2-devel
中途可能需要更新其他的依赖, 确定就可以了
No package ‘openssl’ found
configure: error: Package requirements (openssl >= 1.0.1) were not met:
No package 'openssl' found
解决方法
yum install openssl-devel
No package ‘sqlite3’ found
configure: error: Package requirements (sqlite3 > 3.7.4) were not met:
No package 'sqlite3' found
解决方法
yum install sqlite-devel
No package ‘libcurl’ found
configure: error: Package requirements (libcurl >= 7.15.5) were not met:
No package 'libcurl' found
解决方法
yum install libcurl-devel
Package requirements (icu-uc >= 50.1 icu-io icu-i18n) were not met
configure: error: Package requirements (icu-uc >= 50.1 icu-io icu-i18n) were not met:
No package 'icu-uc' found
No package 'icu-io' found
No package 'icu-i18n' found
解决方法
yum install libicu-devel
configure: error: C++ preprocessor “/lib/cpp” fails sanity check
checking whether g++ accepts -g... no
checking how to run the C++ preprocessor... /lib/cpp
configure: error: in `/data/programs/php-7.4.7':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
See `config.log' for more details
解决方法, 缺少g++库, 安装
yum install gcc-c++
No package ‘oniguruma’ found
configure: error: Package requirements (oniguruma) were not met:
No package 'oniguruma' found
如果启用了–with-mbstring，则需要安装 oniguruma, 因为7.4的正则表达式使用了oniguruma
解决方法
yum install oniguruma oniguruma-devel
No package ‘libxslt’ found
configure: error: Package requirements (libxslt >= 1.1.0) were not met:
No package 'libxslt' found
–with-xsl 打开XSLT 文件支持，扩展了libXML2库 ，需要libxslt软件
解决方法
yum install libxslt-devel
No package ‘libpng’ found
configure: error: Package requirements (libpng) were not met:
No package 'libpng' found
解决方法
yum install libpng-devel
No package ‘libjpeg’ found
configure: error: Package requirements (libjpeg) were not met:
No package 'libjpeg' found
解决方法
yum install libjpeg-devel
No package ‘freetype2’ found
configure: error: Package requirements (freetype2) were not met:
No package 'freetype2' found
解决方法
yum install freetype-devel
No package ‘libzip’ found
configure: error: Package requirements (libzip >= 0.11) were not met:
No package 'libzip' found
解决方法
这里不使用软件仓库中的libzip, 也就是不使用yum install libzip-devel,
因为版本不够, 安装方法看下面一条
Requested ‘libzip >= 0.11’ but version of libzip is 0.10.1
这是因为软件仓库的libzip版本过低, 需要手动编译安装
# 先删除原有的libzip
yum remove -y libzip
# 下载并手动编译安装, 自己下载到合适的位置
wget
# 解压
tar -zxvf libzip-1.2.0.tar.gz
# 进入到源码目录
cd libzip-1.2.0
# 配置
./configure
# 编译并安装
make && make install
# 更新依赖路径, centos版本小于8的,一定要执行下面这个命令,不然还是找不到 libzip
export PKG_CONFIG_PATH="/usr/local/lib/pkgconfig/"
# 上面一行的代码参考自
配置完成
出现下面的提示就代表已经配置成功了, 可以进行编译安装了
+--------------------------------------------------------------------+
| License: |
| This software is subject to the PHP License, available in this |
| distribution in the file LICENSE. By continuing this installation |
| process, you are bound by the terms of this license agreement. |
| If you do not agree with the terms of this license, you must abort |
| the installation process at this point. |
+--------------------------------------------------------------------+
Thank you for using PHP.
编译安装
没啥好说的, make 就行了
make && make install
测试php命令
是时候亮相一下php命令了,
如果忘了了php的安装目录, 使用whereis 找一下
whereis php
php: /usr/local/php
# 成功安装
/usr/local/php/bin/php -v
PHP 7.4.7 (cli) (built: Jun 21 2020 18:19:20) ( ZTS )
Copyright (c) The PHP Group
Zend Engine v3.4.0, Copyright (c) Zend Technologies
# 来看一下安装的模块
/usr/local/php/bin/php -m
[PHP Modules]
bcmath
Core
ctype
curl
date
dom
filter
ftp
gd
gettext
hash
iconv
intl
json
libxml
mbstring
mysqli
mysqlnd
openssl
pcntl
pcre
PDO
pdo_mysql
pdo_sqlite
Phar
posix
Reflection
session
shmop
SimpleXML
soap
sockets
SPL
sqlite3
standard
sysvsem
tokenizer
xml
xmlreader
xmlrpc
xmlwriter
xsl
zip
zlib
[Zend Modules]
将php命令复制到/usr/bin
cp /usr/local/php/bin/php /usr/bin/
# 现在就可以直接使用php命令了, 方便
php -v
配置php.ini
查看默认的php.ini文件的位置
php -i | grep php.ini
Configuration File (php.ini) Path => /usr/local/php/etc
显示在 /usr/local/php/etc这个文件夹下面, 我们去看一下
cd /usr/local/php/etc
ll
php-fpm.conf.default
php-fpm.d/
可以发现就两个文件, 其中并没有php.ini这个文件
这个时候我们就可以从php的源码中将php.ini复制一份即可
cp /data/programs/php-7.4.7/php.ini-development /usr/local/php/etc/php.ini
修改时区
编辑php.ini文件, 找到;date.timezone, 修改为:
date.timezone = Asia/Shanghai
配置php-fpm
先运行一下php-fpm
/usr/local/php/sbin/php-fpm
ERROR: failed to open configuration file '/usr/local/php/etc/php-fpm.conf': No such file or directory (2)
ERROR: failed to load configuration file '/usr/local/php/etc/php-fpm.conf'
得到了两行报错, 原因是我们还没有配置php-fpm.conf
现在到 /usr/local/php/etc目录下将php-fpm.conf.default拷贝一份并重命名为php-fpm.conf
cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf
修改php-fpm监听的端口号
如果需要修改php-fpm监听的端口号, 那么不能直接在php-fpm.conf中进行修改, 也没有地方可以改
而应该在/usr/local/php/etc/php-fpm.d/ 下面的*.conf中进行修改, 仔细看php-fpm.conf文件
可以看到, 在最下面一行引入了php-fpm.d下面的所有的.conf文件
include=/usr/local/php/etc/php-fpm.d/*.conf
默认php已经带了一个www.conf.default 文件
将这个文件复制一份为www.conf
cp /usr/local/php/etc/php-fpm.d/www.conf.default /usr/local/php/etc/php-fpm.d/www.conf
编辑www.conf, 找到listen = 127.0.0.1:9000 这一段, 修改对应的监听端口即可
设置php-fpm为开机启动
方法1：编辑php-fpm.conf文件, 将pid的注释打开
pid = run/php-fpm.pid
编辑/etc/rc.local文件, 加入php-fpm的配置
/usr/local/php/sbin/php-fpm >/tmp/php-fpm.log 2>&1
方法2：
/etc/init.d/php-fpm start
或者
service php-fpm start
或者
cp php-7.4.21/sapi/fpm/php-fpm.service /usr/lib/systemd/system/php-fpm.service
systemctl start php-fpm.service
systemctl enable php-fpm.service
至此, php7.4的安装就结束了
